Device Profiles
LA-Mesh uses pre-configured YAML profiles optimized for each device role. Profiles set radio parameters, power management, GPS intervals, and network behavior.
Which Profile Do I Need?
Is this a fixed relay on a rooftop or tower?
Yes
station-g2-router
No
Is this a gateway with internet access?
Yes
meshadv-mini-gateway
No
Is this a T-Deck Pro (e-ink screen)?
Yes
tdeck-pro-eink-client
No
tdeck-plus-client
Profile Details
station-g2-router
ROUTERHigh-power relay for rooftop and tower deployment. Always-on, no power saving.
| Device Role | ROUTER |
| TX Power | 30 dBm (1 W) |
| Modem Preset | LONG_FAST |
| Hop Limit | 5 |
| Position Broadcast | Every 15 min (fixed position) |
| Bluetooth | Disabled |
| WiFi | Disabled |
| Power Saving | Disabled (never sleeps) |
tdeck-plus-client
CLIENTPortable device for community members. Balanced power and connectivity.
| Device Role | CLIENT |
| TX Power | 22 dBm |
| Modem Preset | LONG_FAST |
| Hop Limit | 5 |
| GPS Interval | Every 2 min |
| Position Broadcast | Every 15 min |
| Bluetooth | Enabled (for phone app) |
| Power Saving | Light sleep when idle |
tdeck-pro-eink-client
CLIENTE-ink device optimized for maximum battery life. Aggressive power saving.
| Device Role | CLIENT |
| TX Power | 22 dBm |
| Modem Preset | LONG_FAST |
| Hop Limit | 5 |
| GPS Interval | Every 5 min |
| Position Broadcast | Every 30 min |
| Bluetooth | Enabled |
| Power Saving | Deep sleep when idle |
meshadv-mini-gateway
ROUTER_CLIENTRaspberry Pi HAT for SMS/email bridge and MQTT gateway duty. Always-on, wired power.
| Device Role | ROUTER_CLIENT |
| TX Power | 22 dBm |
| Modem Preset | LONG_FAST |
| Hop Limit | 5 |
| MQTT | Enabled (local Mosquitto) |
| Serial | Enabled (debug logging) |
| Power Saving | Disabled (always-on) |
Applying a Profile
# Apply with auto-backup just configure-profile station-g2-router /dev/ttyUSB0 # Apply channels (reads PSK from operator keystore) just configure-channels /dev/ttyUSB0 # Verify configuration meshtastic --port /dev/ttyUSB0 --info